BACK TO ALL ENTRIES

Which Company are you working for?Built Electrical
Which Trade are you working for?Electrical
StateNSW
Date of Visit30/07/2018
Technician's NameShane Hamilton
Built Job Number31964
Swarovski Site in NSWmacarthur_square
Test Period6 Monthly (90 minutes)
Push Button Test
  • Carry out push button test for correct operation
RCD Details (6 Month)
Distribution Board No. Circuit No. Push Button (YorN) Pass / Fail (PorF) Fault? Repaired on Site (YorN)
Db1 1 Y P
2 Y P
3 Y P
4 Y P
5 Y P
11 Y P
12 Y P
14 Y P
Exit/Emergency Light Checklist
  • Check there has been no power interruption for at least 16 hours prior to test
  • Carry out discharge test to ensure the luminaries remain illuminated for the required in service duration (90 or 120 minutes)
  • Re-instate power to luminaries and check that the battery charge operation indicatior functions correctly
  • Report any failures and provide costing to rectify (where applicable)
Timers
  • Check timers for correct operation and timing
EMERGENCY LIGHTS
Distribution Board No. ID No. Surface mounted or recessed? (SorR) Lamp OK? (YorN) Battery OK? (YorN) Condition OK? (YorN) Pass / Fail (PorF) Fault Repaired on Site (YorN) Under Warranty (YorN)
BOH Y Y Y P
DB Showroom Y Y Y P
EXIT LIGHTS
Distribution Board No. ID No. Lamp OK? (YorN) Battery OK? (YorN) Condition OK? (YorN) Pass / Fail (PorF) Fault Repaired on Site (YorN) Under Warranty (YorN)
DB Showroom/shopfront Y Y Y P
General Checklist
  • Check correct operation of all luminaries
  • Report on any faulty luminaries/control gear
  • Provide costing to repair/replace
Are there accurate switchboard legends within each switchboard? Please take a photo send with report to epm@builtelectrical.com.auYes
If Yes, please upload all copies of legends here... (Limit of 6 megabytes total)If Yes, please upload all copies of legends here... (Limit of 6 megabytes total)
Switched Socket Outlets
  • Carry out visual check on SSOs for signs of misuse, blackening or deterioration
  • Check and report any outlets with multiple power boards overloading
  • Ensure any power boards used have an integral over-current limiter
Are there any Warranty items needing to be repaired?No
Paint & surfaces are clean?Yes
Comments

Ok

Fixture draws able to open and close freely?No
Comments

Draw Gets stuck 2nd draw right hand side

Locks work on all fixtures?No
Comments

Broken lock back vatrine new lock onsite

Is there chips, dents or defects to joinery?No
Comments

Ok

Is there damage to skirtings?No
Comments

Ok

General cleanliness of fixtures, ceilings, P.O.S - provide detailsYes
Comments

Ok

Roller shutters in working order and clean?Yes
Comments

Ok

General cleanliness of Façade? - provide detailsYes
Comments

Ok

Lighting operational, (eg logo)?Yes
Comments

Ok

Windows clean?Yes
Comments

Ok

Door handles clean and tight?Yes
Comments

Ok

Are there any repairs and additional works required?No
Fire Extinguisher Details
Type (ABE Powder) Size (4.5kg) Last Test Date Manufacture Date Pressure Indicator (Green Zone) Location In Store Compliant (Y/N)
Powder 4.5kg July 2018 05 2018 Yes Boh Y
Confirm how many power points are underneath the window box?Two
Next Test Due in 3 months30/10/2018
Site Status SelectorStore now fully compliant
Technician's NameKeith Haly
Store Manager's NameMarilyn EPTON