SWAROVSKI Electrical – Submitted Reports |

BACK TO ALL ENTRIES

Which Company are you working for?

Built Electrical

Which Trade are you working for?

Electrical

State

VIC

Date of Visit

02/08/2018

Technician's Name

Gerard O’Connell

Built Job Number

31999

Swarovski Site in VIC

northland

Test Period

6 Monthly (90 minutes)

Push Button Test

Carry out push button test for correct operation

RCD Details (6 Month)

Distribution Board No.	Circuit No.	Push Button (YorN)	Pass / Fail (PorF)
1	4	Y	P
	6	Y	P
	8	Y	P
	9	Y	P
	13	Y	P
	14	Y	P
	17	Y	P
	18	Y	P
	19	Y	P
	24	Y	P

Exit/Emergency Light Checklist

Check there has been no power interruption for at least 16 hours prior to test
Carry out discharge test to ensure the luminaries remain illuminated for the required in service duration (90 or 120 minutes)
Re-instate power to luminaries and check that the battery charge operation indicatior functions correctly
Report any failures and provide costing to rectify (where applicable)

Timers

Check timers for correct operation and timing

EMERGENCY LIGHTS

Distribution Board No.	ID No.	Surface mounted or recessed? (SorR)	Lamp OK? (YorN)	Battery OK? (YorN)	Condition OK? (YorN)	Pass / Fail (PorF)
DB1	1	R	Y	Y	Y	P
	2	R	Y	Y	Y	P
	3	R	Y	Y	Y	P
	4	R	Y	Y	Y	P

EXIT LIGHTS

Distribution Board No.	ID No.	Lamp OK? (YorN)	Battery OK? (YorN)	Condition OK? (YorN)	Pass / Fail (PorF)	Fault	Repaired on Site (YorN)	Under Warranty (YorN)
DB1	1	Y	Y	Y	P
	2	Y	Y	Y	P

General Checklist

Check correct operation of all luminaries
Report on any faulty luminaries/control gear
Provide costing to repair/replace

Are there accurate switchboard legends within each switchboard? Please take a photo send with report to epm@builtelectrical.com.au

Yes

If Yes, please upload all copies of legends here... (Limit of 6 megabytes total)

Switched Socket Outlets

Carry out visual check on SSOs for signs of misuse, blackening or deterioration
Check and report any outlets with multiple power boards overloading
Ensure any power boards used have an integral over-current limiter

Are there any Warranty items needing to be repaired?

Paint & surfaces are clean?

Yes

Fixture draws able to open and close freely?

Yes

Locks work on all fixtures?

Comments

Lock under watches on right side is hard to open sometimes, lock next to remix table hard to open sometimes, front door closest to counter - lock hard to open and handles very loose.

Is there chips, dents or defects to joinery?

Is there damage to skirtings?

General cleanliness of fixtures, ceilings, P.O.S - provide details

Comments

Ceiling behind counter has water damage next to fire sprinkler and camera.

Any issues found onsite please take photos and upload here

Roller shutters in working order and clean?

Yes

General cleanliness of Façade? - provide details

Yes

Lighting operational, (eg logo)?

Yes

Windows clean?

Yes

Door handles clean and tight?

Comments

Front door

Any issues found onsite please take photos and upload here

ELECTRICAL LIST OF REPAIRS & ADDITIONAL WORKS REQUIRED - (ALL FIELDS MANDATORY) - Please supply photo's

Defect Item	Location of Item (on premises)	Quantity	Details of fault /problem	Repaired on Site? (YorN)	Quote to be sent? (YorN)	To return to Site	Comments
Light not working	Front Spot light lighting up pillar at front of shop	1	Not working	N	N	Y	Sourced a driver replacement but could not find the exact specification. Found another driver that would be compatible as replacement and will send back tech once driver has been delivered.

General Works Checklist

Inspect all furniture and fittings for visible damage
Inspect all walls, ceilings, skirtings and floors for visible damage
Inspect storefront, façade and store LED logo for correct operations and visible damage
Inspect roller shutter and doors for correct operations and visible damage
Check fire extinguishers, update compliance tags/labels

Are there any repairs and additional works required?

General List of Repairs and additional works required

Defect Item	Location of Item	Details of Problem	Repaired on Site	Quote to be Sent	Comments
Ceiling	Behind the counter	Water damaged by leak	N	N

Fire Extinguisher Details

Type (ABE Powder)	Size (4.5kg)	Last Test Date	Manufacture Date	Pressure Indicator (Green Zone)	Location In Store	Compliant (Y/N)
Powder	2.5	06/18	01/14	Green	Boh	Y

Confirm how many power points are underneath the window box?

One

Next Test Due in 3 months

02/11/2018

Site Status Selector

Store now fully compliant

Technician's Name

Gerard O'Connell

Store Manager's Name

Gemma Kim