SWAROVSKI Electrical – Submitted Reports |

BACK TO ALL ENTRIES

Which Company are you working for?

Sturdie Trade Services

Which Trade are you working for?

Electrical

State

NSW

Date of Visit

25/07/2019

Technician's Name

Eddie Zaida

Built Job Number

41820

Swarovski Site in NSW

homebush_dfo

Test Period

6 Monthly (90 minutes)

Push Button Test

Carry out push button test for correct operation

RCD Details (6 Month)

Distribution Board No.	Circuit No.	Push Button (YorN)	Pass / Fail (PorF)
DB1	1	Y	P
	2	Y	P
	3	Y	P
	4	Y	P
	5	Y	P
	6	Y	P
	7	Y	P
	8	Y	P

Exit/Emergency Light Checklist

Check there has been no power interruption for at least 16 hours prior to test
Carry out discharge test to ensure the luminaries remain illuminated for the required in service duration (90 or 120 minutes)
Re-instate power to luminaries and check that the battery charge operation indicatior functions correctly
Report any failures and provide costing to rectify (where applicable)

Is there an Emergency Light Test Facility & is it labelled properly?

Yes

Timers

Check timers for correct operation and timing

EMERGENCY LIGHTS

Distribution Board No.	ID No.	Surface mounted or recessed? (SorR)	Lamp OK? (YorN)	Battery OK? (YorN)	Condition OK? (YorN)	Pass / Fail (PorF)	Fault	Repaired on Site (YorN)	Under Warranty (YorN)
DB1	01	S	Y	Y	Y	P

EXIT LIGHTS

Distribution Board No.	ID No.	Lamp OK? (YorN)	Battery OK? (YorN)	Condition OK? (YorN)	Pass / Fail (PorF)	Fault	Repaired on Site (YorN)	Under Warranty (YorN)
DB1	01	Y	Y	Y	P

General Checklist

Check correct operation of all luminaries
Report on any faulty luminaries/control gear
Provide costing to repair/replace

Are there accurate switchboard legends within each switchboard? Please take a photo send with report to epm@builtelectrical.com.au

Yes

If Yes, please upload all copies of legends here... (Limit of 6 megabytes total)

Switched Socket Outlets

Carry out visual check on SSOs for signs of misuse, blackening or deterioration
Check and report any outlets with multiple power boards overloading
Ensure any power boards used have an integral over-current limiter

Window Display Boxes - Is the Cabling in good conditions?

Are there any Warranty items needing to be repaired?

Paint & surfaces are clean?

Comments

Marks on walls and door

Fixture draws able to open and close freely?

Yes

Locks work on all fixtures?

Comments

Vitrine does not lock. Locking mechanism removed due it failing and getting stuck (currently being addressed on job # 34004)

Is there chips, dents or defects to joinery?

Yes

Is there damage to skirtings?

Yes

Comments

Marks and scratches on skirtings.

General cleanliness of fixtures, ceilings, P.O.S - provide details

Good

Any issues found onsite please take photos and upload here

Roller shutters in working order and clean?

Yes

General cleanliness of Façade? - provide details

Good

Lighting operational, (eg logo)?

Yes

Windows clean?

Yes

Door handles clean and tight?

Yes

ELECTRICAL LIST OF REPAIRS & ADDITIONAL WORKS REQUIRED - (ALL FIELDS MANDATORY) - Please supply photo's

Defect Item	Location of Item (on premises)	Quantity	Details of fault /problem	Repaired on Site? (YorN)	Quote to be sent? (YorN)	To return to Site	Comments
Window Display Box	Front of Store	1	Corrugated conduit comes out of the ground with what looks to be damaged cabling connected to junction box under unit.	N	Y	TBA	Possible solution would be to install solid mounting block to front of unit, which would be visible. The removable flap is at the back of unit instead of the front which is why cabling keeps getting damaged. Quote to be sent for approval.

General Works Checklist

Inspect all furniture and fittings for visible damage
Inspect all walls, ceilings, skirtings and floors for visible damage
Inspect storefront, façade and store LED logo for correct operations and visible damage
Inspect roller shutter and doors for correct operations and visible damage
Check fire extinguishers, update compliance tags/labels

Are there any repairs and additional works required?

Yes

General List of Repairs and additional works required

Defect Item	Location of Item	Details of Problem	Repaired on Site	Quote to be Sent	Comments
ABE Fire Extinguisher	BOH	Testing required	N	N	As per John's email 26/7/19, to be addressed once new schedule is confirmed in Service Channel.
Various marks & scratches	Walls, skirtings & door	Dirty marks & scratches	N	N	As per John's email 26/7/19, to be addressed during next maintenance.

Fire Extinguisher Details

Type (ABE Powder)	Size (4.5kg)	Last Test Date	Manufacture Date	Pressure Indicator (Green Zone)	Location In Store	Compliant (Y/N)
ABE	4.5kg	12/2018	10/2018	Green	BOH	N

Next Test Due in 3 months

25/10/2019

Site Status Selector

Store now fully compliant

Technician's Name

Eddie Zaida

Store Manager's Name

Florida Castro