Check there has been no power interruption for at least 16 hours prior to test
Carry out discharge test to ensure the luminaries remain illuminated for the required in service duration (90 or 120 minutes)
Re-instate power to luminaries and check that the battery charge operation indicatior functions correctly
Report any failures and provide costing to rectify (where applicable)
Is there an Emergency Light Test Facility & is it labelled properly?
Yes
Timers
Check timers for correct operation and timing
EMERGENCY LIGHTS
Distribution Board No.
ID No.
Surface mounted or recessed? (SorR)
Lamp OK? (YorN)
Battery OK? (YorN)
Condition OK? (YorN)
Pass / Fail (PorF)
Fault
Repaired on Site (YorN)
Under Warranty (YorN)
1
R
Y
Y
Y
P
R
R
Y
Y
Y
P
EXIT LIGHTS
Distribution Board No.
ID No.
Lamp OK? (YorN)
Battery OK? (YorN)
Condition OK? (YorN)
Pass / Fail (PorF)
Fault
Repaired on Site (YorN)
Under Warranty (YorN)
1
Y
Y
Y
P
General Checklist
Check correct operation of all luminaries
Report on any faulty luminaries/control gear
Provide costing to repair/replace
Are there accurate switchboard legends within each switchboard? Please take a photo send with report to epm@builtelectrical.com.au
Yes
If Yes, please upload all copies of legends here... (Limit of 6 megabytes total)
Switched Socket Outlets
Carry out visual check on SSOs for signs of misuse, blackening or deterioration
Check and report any outlets with multiple power boards overloading
Ensure any power boards used have an integral over-current limiter
Window Display Boxes - Is the Cabling in good conditions?
No
Are there any Warranty items needing to be repaired?
No
Paint & surfaces are clean?
Yes
Fixture draws able to open and close freely?
No
Comments
The “Always On vitrine” locking pin for all three draws doesn’t lock all draws at the same time and some stay lock after it has been locked. It takes a few goes unlocking them to be able to open all 3 draws at once.
Locks work on all fixtures?
No
Comments
2x front door locks are lose. Locksmith required to tighten them. Please have them attend ASAP as they secure the shop at night. Aluminium strip for were the lock pins drop into wobbles a lot. Needs to be fix to the ground better.
Is there chips, dents or defects to joinery?
No
Is there damage to skirtings?
No
General cleanliness of fixtures, ceilings, P.O.S - provide details
Good
Any issues found onsite please take photos and upload here
Roller shutters in working order and clean?
Yes
General cleanliness of Façade? - provide details
Good
Lighting operational, (eg logo)?
Yes
Windows clean?
Yes
Door handles clean and tight?
Yes
ELECTRICAL LIST OF REPAIRS & ADDITIONAL WORKS REQUIRED - (ALL FIELDS MANDATORY) - Please supply photo's
Defect Item
Location of Item (on premises)
Quantity
Details of fault /problem
Repaired on Site? (YorN)
Quote to be sent? (YorN)
To return to Site
Comments
Window display boxes
Store
3
Poor design, Has Potential to be run over and damaged
N
N
N
Needs to be improved and bought up to standard
Always on Vitrine
Store
1
Locks not working properly
N
N
Y
Organising parts from Oldenburger as advised by John
Front door locks
Store
1
Locks not secure
N
N
Y
Job will be attended to on Wednesday 22/7
Are there any repairs and additional works required?
No
Fire Extinguisher Details
Type (ABE Powder)
Size (4.5kg)
Last Test Date
Manufacture Date
Pressure Indicator (Green Zone)
Location In Store
Compliant (Y/N)
Abe
4.5
Has not been tested yet
03/19
Y
BOH
Testing is happening July/Early August
Next Test Due in 3 months
17/01/2021
Site Status Selector
Completed but with repairs required
Technician's Name
Brodie Robertson
Store Manager's Name
Michelle Hughes
The Built Services Group seeks to apply innovation and technology for greater client services, business efficiencies and thinking Green.
