BACK TO ALL ENTRIES

Which Company are you working for?Sturdie Trade Services
Which Trade are you working for?Electrical
StateACT
Date of Visit23/07/2020
Technician's NameWill Andrews
Built Job Number46493
Swarovski Site in ACTcanberra
Test Period12 Monthly (90 minutes)
Push Button Test
  • Carry out push button test for correct operation
RCD Details (12 Month)
Distribution Board No. Circuit No. Push Button (YorN) Pass / Fail (PorF) Fault? Repaired on Site (YorN)
DBAF17 1 Y P
DBAF17 2 Y P
DBAF17 3 Y P
DBAF17 4 Y P
DBAF17 5 Y P
DBAF17 6 Y P
DBAF17 7 Y P
DBAF17 8 Y P
DBAF17 9 Y P
Exit/Emergency Light Checklist
  • Check there has been no power interruption for at least 16 hours prior to test
  • Carry out discharge test to ensure the luminaries remain illuminated for the required in service duration (90 or 120 minutes)
  • Re-instate power to luminaries and check that the battery charge operation indicatior functions correctly
  • Report any failures and provide costing to rectify (where applicable)
Is there an Emergency Light Test Facility & is it labelled properly?Yes
Timers
  • Check timers for correct operation and timing
EMERGENCY LIGHTS
Distribution Board No. ID No. Surface mounted or recessed? (SorR) Lamp OK? (YorN) Battery OK? (YorN) Condition OK? (YorN) Pass / Fail (PorF) Fault Repaired on Site (YorN) Under Warranty (YorN)
DBAF17 2 R Y Y Y P
DBAF17 3 R Y Y Y P
EXIT LIGHTS
Distribution Board No. ID No. Lamp OK? (YorN) Battery OK? (YorN) Condition OK? (YorN) Pass / Fail (PorF) Fault Repaired on Site (YorN) Under Warranty (YorN)
DBAF17 1 Y Y Y P
General Checklist
  • Check correct operation of all luminaries
  • Report on any faulty luminaries/control gear
  • Provide costing to repair/replace
Are there accurate switchboard legends within each switchboard? Please take a photo send with report to epm@builtelectrical.com.auYes
If Yes, please upload all copies of legends here... (Limit of 6 megabytes total)If Yes, please upload all copies of legends here... (Limit of 6 megabytes total)
Switched Socket Outlets
  • Carry out visual check on SSOs for signs of misuse, blackening or deterioration
  • Check and report any outlets with multiple power boards overloading
  • Ensure any power boards used have an integral over-current limiter
Window Display Boxes - Is the Cabling in good conditions?Yes
Are there any Warranty items needing to be repaired?No
Paint & surfaces are clean?Yes
Comments

All good

Fixture draws able to open and close freely?Yes
Comments

All open correct

Locks work on all fixtures?Yes
Comments

All locks work

Is there chips, dents or defects to joinery?No
Comments

Joinery in good condition

Is there damage to skirtings?No
Comments

Skirtings all good

General cleanliness of fixtures, ceilings, P.O.S - provide detailsGood
Comments

All good

Roller shutters in working order and clean?Yes
General cleanliness of Façade? - provide detailsGood
Lighting operational, (eg logo)?Yes
Windows clean?Yes
Door handles clean and tight?Yes
Are there any repairs and additional works required?No
Fire Extinguisher Details
Type (ABE Powder) Size (4.5kg) Last Test Date Manufacture Date Pressure Indicator (Green Zone) Location In Store Compliant (Y/N)
ABE powder 4.5KG Oct 2019 2017 Yes Office Y
Next Test Due in 3 months23/02/2021
Site Status SelectorStore now fully compliant
Technician's NameWill Andrews
Store Manager's NameCarly Latham