BACK TO ALL ENTRIES

Which Company are you working for?Sturdie Trade Services
Which Trade are you working for?Electrical
StateVIC
Date of Visit21/01/2021
Technician's NameNathan McBain
Built Job Number53970
Swarovski Site in VICmyer_melbourne
Test Period6 Monthly (90 minutes)
Push Button Test
  • Carry out push button test for correct operation
RCD Details (6 Month)
Distribution Board No. Circuit No. Push Button (YorN) Pass / Fail (PorF) Fault? Repaired on Site (YorN)
N/A
Exit/Emergency Light Checklist
  • Check there has been no power interruption for at least 16 hours prior to test
  • Carry out discharge test to ensure the luminaries remain illuminated for the required in service duration (90 or 120 minutes)
  • Re-instate power to luminaries and check that the battery charge operation indicatior functions correctly
  • Report any failures and provide costing to rectify (where applicable)
Is there an Emergency Light Test Facility & is it labelled properly?No
Timers
  • Check timers for correct operation and timing
EMERGENCY LIGHTS
Distribution Board No. ID No. Surface mounted or recessed? (SorR) Lamp OK? (YorN) Battery OK? (YorN) Condition OK? (YorN) Pass / Fail (PorF) Fault Repaired on Site (YorN) Under Warranty (YorN)
N/A
EXIT LIGHTS
Distribution Board No. ID No. Lamp OK? (YorN) Battery OK? (YorN) Condition OK? (YorN) Pass / Fail (PorF) Fault Repaired on Site (YorN) Under Warranty (YorN)
N/A
General Checklist
  • Check correct operation of all luminaries
  • Report on any faulty luminaries/control gear
  • Provide costing to repair/replace
  • Inspection of mobile & stationary electrical appliances
Are there accurate switchboard legends within each switchboard? Please take a photo send with report to epm@builtelectrical.com.auNo
Switched Socket Outlets
  • Carry out visual check on SSOs for signs of misuse, blackening or deterioration
  • Check and report any outlets with multiple power boards overloading
  • Ensure any power boards used have an integral over-current limiter
Window Display Boxes - Is the Cabling in good conditions?Yes
Are there any Warranty items needing to be repaired?No
Paint & surfaces are clean?Yes
Fixture draws able to open and close freely?No
Comments

1 × VITRINE DRAW FALLING OFF SLIDER WHEN OPENED, FOUND BRACKET HOLDING SLIDER TO DRAW HAD FALLEN OFF, RE-ATTACHED WITH LARGER GAUGE SCREW.

Locks work on all fixtures?No
Comments

1 × VITRINE CABINET (UNDER GLASS WALL DISPLAY CASE) NOT LOCKING , MOVED DOWN LOCKING BRACKET AND FILED SIDE OF BRACKET TO TRY AND REDUCE FRICTION WITH INTERNAL BRACKET INSIDE OF CABINET.

Is there chips, dents or defects to joinery?No
Is there damage to skirtings?No
General cleanliness of fixtures, ceilings, P.O.S - provide detailsGood
Any issues found onsite please take photos and upload here
  • Any issues found onsite please take photos and upload here
  • Any issues found onsite please take photos and upload here
Roller shutters in working order and clean?Yes
General cleanliness of Façade? - provide detailsGood
Lighting operational, (eg logo)?Yes
Windows clean?Yes
Door handles clean and tight?Yes
ELECTRICAL LIST OF REPAIRS & ADDITIONAL WORKS REQUIRED - (ALL FIELDS MANDATORY) - Please supply photo's
Defect Item Location of Item (on premises) Quantity Details of fault /problem Repaired on Site? (YorN) Quote to be sent? (YorN) To return to Site Comments
VITRINE CABINET LOCK WALL UNDER GLASS DISPLAY CABINET 1 NOT LOCKING Y N N 1 × VITRINE CABINET (UNDER GLASS WALL DISPLAY CASE) NOT LOCKING , MOVED DOWN LOCKING BRACKET AND FILED SIDE OF BRACKET TO TRY AND REDUCE FRICTION WITH INTERNAL BRACKET INSIDE OF CABINET.
VITRINE CABINET DRAW SLIDER WALL UNDER VISUAL DISPLAY 1 DRAW FALLING OFF SLIDER Y N N 1 × VITRINE DRAW FALLING OFF SLIDER WHEN OPENED, FOUND BRACKET HOLDING SLIDER TO DRAW HAD FALLEN OFF, RE-ATTACHED WITH LARGER GAUGE SCREW.
TEST AND TAG STORE 10 ITEMS NEXT TEST AND TAG DUE MARCH 2021 N N TBC SENT TO JOHN FOR APPROVAL
General Works Checklist
  • Inspect all furniture and fittings for visible damage
  • Inspect all walls, ceilings, skirtings and floors for visible damage
  • Inspect storefront, façade and store LED logo for correct operations and visible damage
  • Inspect roller shutter and doors for correct operations and visible damage
  • Check fire extinguishers, note compliance date
  • Make sure all cabinet door hinges are firmly secured
  • Check there is No Tripping Hazards in the sales or backroom areas
  • Inspect plumbing is working as intended. If no, note in general repairs and repair where possible
Are there any repairs and additional works required?No
Next Test Due in 3 months21/07/2021
Site Status SelectorStore now fully compliant
Technician's NameNATHAN MCBAIN
Store Manager's NameMaggie Chen