SWAROVSKI Electrical – Submitted Reports |

BACK TO ALL ENTRIES

Which Company are you working for?

Sturdie Trade Services

Which Trade are you working for?

Electrical

State

VIC

Date of Visit

29/01/2021

Technician's Name

Nathan McBain

Built Job Number

53974

Swarovski Site in VIC

doncaster

Test Period

6 Monthly (90 minutes)

Push Button Test

Carry out push button test for correct operation

RCD Details (6 Month)

Distribution Board No.	Circuit No.	Push Button (YorN)	Pass / Fail (PorF)
MSB	02	Y	P
	03	Y	P
	04	Y	P
	05	Y	P
	06	Y	P
	07	Y	P
	08	Y	P
	09	Y	P

Exit/Emergency Light Checklist

Check there has been no power interruption for at least 16 hours prior to test
Carry out discharge test to ensure the luminaries remain illuminated for the required in service duration (90 or 120 minutes)
Re-instate power to luminaries and check that the battery charge operation indicatior functions correctly
Report any failures and provide costing to rectify (where applicable)

Is there an Emergency Light Test Facility & is it labelled properly?

Timers

Check timers for correct operation and timing

EMERGENCY LIGHTS

Distribution Board No.	ID No.	Surface mounted or recessed? (SorR)	Lamp OK? (YorN)	Battery OK? (YorN)	Condition OK? (YorN)	Pass / Fail (PorF)	Fault	Repaired on Site (YorN)	Under Warranty (YorN)
MSB	EM02	R	Y	Y	Y	P
	EM03	R	Y	Y	Y	P

EXIT LIGHTS

Distribution Board No.	ID No.	Lamp OK? (YorN)	Battery OK? (YorN)	Condition OK? (YorN)	Pass / Fail (PorF)	Fault	Repaired on Site (YorN)	Under Warranty (YorN)
MSB	EX01	Y	Y	Y	P

General Checklist

Check correct operation of all luminaries
Report on any faulty luminaries/control gear
Provide costing to repair/replace
Inspection of mobile & stationary electrical appliances

Are there accurate switchboard legends within each switchboard? Please take a photo send with report to epm@builtelectrical.com.au

Yes

If Yes, please upload all copies of legends here... (Limit of 6 megabytes total)

Switched Socket Outlets

Carry out visual check on SSOs for signs of misuse, blackening or deterioration
Check and report any outlets with multiple power boards overloading
Ensure any power boards used have an integral over-current limiter

Window Display Boxes - Is the Cabling in good conditions?

Yes

Are there any Warranty items needing to be repaired?

Paint & surfaces are clean?

Yes

Fixture draws able to open and close freely?

Yes

Locks work on all fixtures?

Comments

6 × Vittrine cabinets not locking

Is there chips, dents or defects to joinery?

Is there damage to skirtings?

General cleanliness of fixtures, ceilings, P.O.S - provide details

Good

Any issues found onsite please take photos and upload here

Roller shutters in working order and clean?

Yes

General cleanliness of Façade? - provide details

Good

Lighting operational, (eg logo)?

Yes

Windows clean?

Yes

Door handles clean and tight?

Yes

ELECTRICAL LIST OF REPAIRS & ADDITIONAL WORKS REQUIRED - (ALL FIELDS MANDATORY) - Please supply photo's

Defect Item	Location of Item (on premises)	Quantity	Details of fault /problem	Repaired on Site? (YorN)	Quote to be sent? (YorN)	To return to Site	Comments
EMERGENCY TEST FACILITY	MSB	1	NO TEST FACILITY INSTALLED	N	TBC	TBC	EMAILED JOHN
TEST AND TAG	STORE	20	NEXT TEST AND TAG DUE 12_03_21	N	N	N	EMAILED JOHN
RECESSED SQUARE SHOP LIGHTS	SALES FLOOR	5	FAILED TO ILLUMINATE	N	TBC	TBC	4.0M TO CEILING, 10FT STEPS REQUIRED, BEFORE TRADE. EMAILED JOHN
WALL CRSTAL SPOTS	NORTH WALL	8 × 4 SPOT AND 2 × 3 SPOT (ALL)	FAILED TO ILLUMINATE	N	TBC	TBC	4.0M TO CEILING. FOUND 24V CABLE COMING FROM TOP CRYSTAL SPOT SUPPLING BOTTOM CRYSTAL SPOTS, TESTED NO VOLTAGE, POSSIBLE FAULTY DRIVER, DRIVER POSSIBLY SITUATED IN CEILING SPACE, INVESTIGATE FURTHER WHEN 10FT LADDER ONSITE. EMAILED JOHN.
WALL CRSTAL SPOTS	SOUTH WALL	BOTTOM 1 × 3 SPOT. TOP 2 × 4 SPOT	FAILED TO ILLUMINATE	N	TBC	TBC	EMAILED JOHN
CENTER COLUMN CRSTAL SPOTS	SALES FLOOR	BOTTOM 1 × 3 SPOT, TOP 8 × 3 SPOT	FAILED TO ILLUMINATE	N	TBC	TBC	EMAILED JOHN
9 SPOT	GLASS WALL CABINET NORTH WALL	1 × 9 SPOT	1 GLOBE OUT ON 1× 9 SPOTS FAILED TO ILLUMINATE	N	TBC	TBC	PLEASE ADVISE IF STURDIE IS TO REPAIR.
9 SPOT	GLASS WALL CABINET NORTH WALL	1 × 9 SPOT	1 GLOBE OUT ON 1× 9 SPOTS FAILED TO ILLUMINATE	N	TBC	TBC	PLEASE ADVISE IF STURDIE IS TO REPAIR.
9 SPOT	GLASS WALL CABJNET SOUTH WALL	1 × 9 SPOT	1 GLOBE OUT ON 1× 9 SPOTS FAILED TO ILLUMINATE	N	TBC	TBC	PLEASE ADVISE IF STURDIE IS TO REPAIR.
VITTRINE CABINETS	SALES FLOOR	6 × CABINETS	FAULTY LOCKS	N	TBC	TBC	ALL VITTRINE CABINETS HAVE HAD LOCKING PIN/HASP REMOVED FROM SIDES OF DRAWS, 2 PER DRAW, 3 DRAWS PER VITTRINE CABINET. LOCKS HAVE NOT WORKED ON VITTRINE CABINETS FOR 3 YEARS AS PER STORE MANAGER. WHEN KEY OPERATED LOCKING MECHANISM DOES NOT SEEM TO OPERATE. THIS IS BEING DISCUSSED WITH JOHN.

General Works Checklist

Inspect all furniture and fittings for visible damage
Inspect all walls, ceilings, skirtings and floors for visible damage
Inspect storefront, façade and store LED logo for correct operations and visible damage
Inspect roller shutter and doors for correct operations and visible damage
Check fire extinguishers, note compliance date

Are there any repairs and additional works required?

Fire Extinguisher Details

Type (ABE Powder)	Size (4.5kg)	Last Test Date	Manufacture Date	Pressure Indicator (Green Zone)	Location In Store	Compliant (Y/N)
ABE POWDER	2.5KG	NOV 2020	01/2012	GREEN	BOH	Y

Next Test Due in 3 months

29/07/2021

Site Status Selector

Store now fully compliant

Technician's Name

NATHAN MCBAIN

Store Manager's Name

Jenny Noone