| Which Company are you working for? | Sturdie Trade Services |
|---|
| Which Trade are you working for? | Electrical |
|---|
| State | QLD |
|---|
| Date of Visit | 24/01/2022 |
|---|
| Technician's Name | Warner Trim |
|---|
| Built Job Number | 62823 |
|---|
| Swarovski Site in QLD | carindale |
|---|
| Test Period | 6 Monthly (90 minutes) |
|---|
| Push Button Test | - Carry out push button test for correct operation
|
|---|
| RCD Details (6 Month) | | Distribution Board No. |
Circuit No. |
Push Button (YorN) |
Pass / Fail (PorF) |
Fault? |
Repaired on Site (YorN) |
|---|
| DB1229 |
2 |
Y |
P |
|
|
| DB1229 |
3 |
Y |
P |
|
|
| DB1229 |
4 |
Y |
P |
|
|
| DB1229 |
5 |
Y |
P |
|
|
| DB1229 |
6 |
Y |
P |
|
|
| DB1229 |
7 |
Y |
P |
|
|
|
|---|
| Exit/Emergency Light Checklist | - Check there has been no power interruption for at least 16 hours prior to test
- Carry out discharge test to ensure the luminaries remain illuminated for the required in service duration (90 or 120 minutes)
- Re-instate power to luminaries and check that the battery charge operation indicatior functions correctly
- Report any failures and provide costing to rectify (where applicable)
|
|---|
| Is there an Emergency Light Test Facility & is it labelled properly? | Yes |
|---|
| Timers | - Check timers for correct operation and timing
|
|---|
| EMERGENCY LIGHTS | | Distribution Board No. |
ID No. |
Surface mounted or recessed? (SorR) |
Lamp OK? (YorN) |
Battery OK? (YorN) |
Condition OK? (YorN) |
Pass / Fail (PorF) |
Fault |
Repaired on Site (YorN) |
Under Warranty (YorN) |
|---|
| DB1229 |
703 |
R |
Y |
Y |
Y |
P |
|
|
|
| DB1229 |
704 |
R |
Y |
Y |
Y |
P |
|
|
|
| DB1229 |
705 |
R |
Y |
Y |
Y |
P |
|
|
|
|
|---|
| EXIT LIGHTS | | Distribution Board No. |
ID No. |
Lamp OK? (YorN) |
Battery OK? (YorN) |
Condition OK? (YorN) |
Pass / Fail (PorF) |
Fault |
Repaired on Site (YorN) |
Under Warranty (YorN) |
|---|
| DB1229 |
487 |
Y |
Y |
Y |
P |
|
|
|
|
|---|
| General Checklist | - Check correct operation of all luminaries
- Report on any faulty luminaries/control gear
- Provide costing to repair/replace
- Inspection of mobile & stationary electrical appliances
|
|---|
| Are there accurate switchboard legends within each switchboard? Please take a photo send with report to epm@builtelectrical.com.au | Yes |
|---|
| If Yes, please upload all copies of legends here... (Limit of 6 megabytes total) |  |
|---|
| Switched Socket Outlets | - Carry out visual check on SSOs for signs of misuse, blackening or deterioration
- Check and report any outlets with multiple power boards overloading
- Ensure any power boards used have an integral over-current limiter
|
|---|
| Window Display Boxes - Is the Cabling in good conditions? | Yes |
|---|
| Are there any Warranty items needing to be repaired? | No |
|---|
| Paint & surfaces are clean? | Yes |
|---|
| Comments | Yes, all ok
|
|---|
| Fixture draws able to open and close freely? | Yes |
|---|
| Comments | Yes, all ok
|
|---|
| Locks work on all fixtures? | No |
|---|
| Comments | locks faulty:
1. Lock on mirror door (below Swarovski sign) - 6800
2. Lock on necklace display drawers (centre back wall) 6800 x 2
|
|---|
| Is there chips, dents or defects to joinery? | No |
|---|
| Comments | All joinery in good condition
|
|---|
| Is there damage to skirtings? | No |
|---|
| Comments | Skirting is in good condition
|
|---|
| General cleanliness of fixtures, ceilings, P.O.S - provide details | Good |
|---|
| Comments | Very clean
|
|---|
| Any issues found onsite please take photos and upload here | |
|---|
| Roller shutters in working order and clean? | No |
|---|
| Comments | No roller door - front door was operational
|
|---|
| General cleanliness of Façade? - provide details | Good |
|---|
| Comments | Very good
|
|---|
| Lighting operational, (eg logo)? | No |
|---|
| Comments | 6 x chandelier LED lamps out (4 x bottom 2 x top)
1 x trospher BOH not working
|
|---|
| Windows clean? | Yes |
|---|
| Comments | Very clean, no marks what so ever
|
|---|
| Door handles clean and tight? | Yes |
|---|
| Any issues found onsite please take photos and upload here | |
|---|
| General Works Checklist | - Inspect all furniture and fittings for visible damage
- Inspect all walls, ceilings, skirtings and floors for visible damage
- Inspect storefront, façade and store LED logo for correct operations and visible damage
- Inspect roller shutter and doors for correct operations and visible damage
- Check fire extinguishers, note compliance date
|
|---|
| Are there any repairs and additional works required? | Yes |
|---|
| General List of Repairs and additional works required | | Defect Item |
Location of Item |
Details of Problem |
Repaired on Site |
Quote to be Sent |
Comments |
|---|
| Locks on cabnets |
2 x drawers below necklaces & mirror door |
Locks not working |
N |
N |
6800 locks |
| Chandelier LED |
Store |
6 x LED lamps out |
Y |
N |
Returned to site and replaced LED lights. with new. |
| Troffer Light |
BOH |
Not working |
N |
N |
Needs to be replaced with LED Panel |
|
|---|
| Fire Extinguisher Details | | Type (ABE Powder) |
Size (4.5kg) |
Last Test Date |
Manufacture Date |
Pressure Indicator (Green Zone) |
Location In Store |
Compliant (Y/N) |
|---|
| Abe Powder |
2.5kg |
Feb 2022 |
June 2018 |
Green |
BOH next to door |
Y |
|
|---|
| Next Test Due in 3 months | 24/07/2022 |
|---|
| Site Status Selector | Store now fully compliant |
|---|
| Technician's Name | Warner Trim |
|---|
| Store Manager's Name | Kat Walt |
|---|
| |
|---|
| |
|---|
