| Partner Name | Built Electrical Australia |
|---|
| State | VIC |
|---|
| Date of Visit | 15/04/2021 |
|---|
| Technician's Name | Nathan McBain |
|---|
| Which Company are you working for? | Sturdie Trade Services |
|---|
| Sturdie Job Number | 54183 |
|---|
| Email | Email hidden; Javascript is required. |
|---|
| The Good Guys Site in VIC | brighton_warehouse |
|---|
|
|
|---|
| Location Name | Brighton Warehouse |
|---|
| |
|---|
| HTML Block |
|
|---|
| Test Period | 6 Monthly (90 minutes) |
|---|
| Push Button Test | - Carry out push button test for correct operation
|
|---|
| Carry out push button test for correct operation | |
|---|
| HTML Block |
|
|---|
| Carry out test with RCD Tester | Carry out push button test and record the results below. |
|---|
| THERMOGRAPHIC TEST RESULTS |
THERMOGRAPHIC TEST RESULTS
|
|---|
| RCD Details (6 Month) | | Distribution Board No. |
Circuit No. |
Push Button (YorN) |
Pass / Fail (PorF) |
Fault? |
Repaired on Site (YorN) |
|---|
| DB1 |
07 |
Y |
P |
|
|
| DB1 |
08 |
Y |
P |
|
|
| DB1 |
09 |
Y |
P |
|
|
| DB1 |
10 |
Y |
P |
|
|
| DB1 |
11 |
Y |
P |
|
|
| DB1 |
12 |
Y |
P |
|
|
| DB1 |
13 |
Y |
P |
|
|
| DB1 |
14 |
Y |
P |
|
|
| DB1 |
15 |
Y |
P |
|
|
| DB1 |
16 |
Y |
P |
|
|
| DB1 |
17 |
Y |
P |
|
|
| DB1 |
18 |
Y |
P |
|
|
| DB1 |
19 |
Y |
P |
|
|
|
|---|
| SF43 Exit/Emergency |
SF43 EXIT/EMERGENCY LIGHTING
|
|---|
| Exit/Emergency Light Checklist | - Check there has been no power interruption for at least 16 hours prior to test
- Carry out discharge test to ensure the luminaries remain illuminated for the required in service duration (90 minutes)
- Re-instate power to luminaries and check that the battery charge operation indicator functions correctly
- Report any failures and replace faulty fittings with stock provided by Sturdie Trade Services – install label with date & fitting number
|
|---|
| Exit/Emergency Light Checklist | - Check there has been no power interruption for at least 16 hours prior to test
- Carry out discharge test to ensure the luminaries remain illuminated for the required in service duration (90 minutes)
- Re-instate power to luminaries and check that the battery charge operation indicator functions correctly
- Report any failures and replace faulty fittings with stock provided by Sturdie Trade Services – install sticker with date & fitting number
- Using a clean cloth, clean reflective surfaces of all exit and emergency luminaires.
|
|---|
| Timers | - Check timers for correct operation and timing
|
|---|
| Switched Socket Outlets | - Carry out visual check on SSOs for signs of misuse, blackening or deterioration
- Check and report any outlets with multiple power boards overloading
- Ensure any power boards used have an integral over-current limiter
|
|---|
| HTML Block |
|
|---|
| EMERGENCY LIGHTS | | Distribution Board No. |
ID No. |
Surface mounted or recessed? (SorR) |
Lamp OK? (YorN) |
Battery OK? (YorN) |
Condition OK? (YorN) |
Pass / Fail (PorF) |
Fault |
Repaired on Site (YorN) |
Under Warranty (YorN) |
|---|
| DB1 |
EM01 |
S |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EM02 |
S |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EM03 |
S |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EM04 |
S |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EM05 |
S |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EM06 |
S |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EM07 |
S |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EM08 |
S |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EM09 |
S |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EM10 |
S |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EM11 |
S |
Y |
Y |
Y |
P |
|
|
|
|
|---|
| HTML Block |
|
|---|
| EXIT LIGHTS | | Distribution Board No. |
ID No. |
Lamp OK? (YorN) |
Battery OK? (YorN) |
Condition OK? (YorN) |
Pass / Fail (PorF) |
Fault |
Repaired on Site (YorN) |
Under Warranty (YorN) |
|---|
| DB1 |
EX01 |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EX02 |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EX03 |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EX04 |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EX05 |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EX06 |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EX07 |
Y |
Y |
Y |
P |
|
|
|
| DB1 |
EX08 |
Y |
Y |
Y |
P |
|
|
|
|
|---|
| SF44 General Lighting & Works |
SF44 GENERAL LIGHTING & WORKS
|
|---|
| General Checklist | - Check correct operation of all luminaries
- Report on any faulty luminaries/control gear
- Provide costing to repair/replace
|
|---|
| HTML Block |
|
|---|
| General Operation/Additional items | - Check with Store Manager to ensure there are no other issues
- Ensure any other electrical work is completed as per Sturdie Trade Services ie, affix label to switchboard
|
|---|
| HTML Block |
|
|---|
| Are there accurate switchboard legends within each switchboard? Please take a photo of legend/s & send with report to maintenance@sturdie.com.au | Yes |
|---|
| Lighting Report | | Description of all lighting installed in store (eg. 21w bare batten) |
Existing (YorN) |
|---|
| Surface Mount Triple T5 Fluorescent Light Fitting |
Y |
| Single 18W/840 Bare Batten |
Y |
| LED Hi-Bay |
Y |
|
|---|
| Are there any Warranty items needing to be repaired? | No |
|---|
| Site Status Selector | Store now fully compliant |
|---|
| Next Test Due in 6 months | 15/10/2021 |
|---|
| |
|---|
| |
|---|
